Slider

Netgear router login IP

The Netgear wireless routers can be configured with web and IP address as login to admin page. Where routerlogin.net is the default web address to access router’s admin settings page, 192.168.1.1 is an alternate IP address for default login to access Netgear Admin Panel. The netgear router login IP can be used when netgear router login not working issue arises www.routerlogin.net or www.routerlogin.com.  It also directs netgear wireless router users to the login page for netgear router admin password input to enter home settings page.

192.168.1.1 Login

 

 

192.168.1.1 Login lets you login to the Netgear router and Access NETGEAR Router Admin Page using 192.168.1.1 as the login address in the address bar. This takes you though same netgear router login to reach Netgear Router Admin Page as routerlogin.com.

Netgear router login not working error!

If you face such issue with routerlogin.net or routerlogin.com web addresses to login Netgear wireless router, try Netgear route login IP address 192.168.1.1 to reach the router’s settings page. For 192.168.1.1 Login, follow the steps here to resolve netgear router login not working issue:

  • Make sure that the computer you are using for Netgear router login is connected to the Netgear wireless Router’s network.

Note:- The computer should be attached to the Netgear router with an Ethernet cable at LAN port or with a wifi connection using SSID and password.

 

  • Turn on the computer to access Netgear router login.
  • Open a default Web Browser on your computer to use the Internet for netgear router login IP.
  • Key in Netger router login IP 192.168.1.1 or http://192.168.1.1 address in the address bar box.
  • Press Enter to begin Netgear router login for your Netear wireless router settings configuration.
  • The Netgear router login page appears with login username and login password fields.
  • Enter the default Netgear login username “admin” and the default Netgear router login password “password” in respective boxes.
  • Select Log In to continue with Netgear router login IP.
  • You will be logged into your Netgear Router basic home Page, also called, admin page.
  • The Netgear router’s basic home can allow the users to configure the router for managing settings.

 

Netgear router login password – routerlogin.net admin password

A new Netgear wireless router is enabled with factory default password settings when bought. Upon access to the Netgear router’s admin interface using local web address routerlogin.net, the default login details are used. These default netgear login username is “admin and password is “password.

This routerlogin.net admin password must be changed from its default name to something strong and secure to be guessed. This will enhance the security of your Netgear router network.

Change the Netgear router login password
  • Turn on the computer to access Netgear router login.
  • Open a default Web Browser on your computer to use the Internet for netgear router login.
  • Key in Netger router login local web address routerlogin.net in the address bar box.
  • Press Enter or Search to begin Netgear router login for your Netear wireless router settings configuration.
  • The Netgear router login page appears with login username and login password fields.
  • Enter the default Netgear login username “admin” and the default Netgear router login password “password” in respective boxes.
  • The Basic home page of Netgear will show on screen.
  • Select the Advanced option by clicking on it.
  • Thereafter, select Administration to access set password option.
  • You will be asked to enter the old and create a new password in given field.
  • Confirm the newly assigned Netgear router admin password for Netgear router login in future.
  • Prompt regarding enable password recovery appears; select it in case you want to recover your lost routerlogin.net admin password in future.
  • Apply all the settings made on the netgear basic home page.

Your netgear router login password is now changed and you have created secure router access.

 

To reset forgotten/lost Netgear Router login Password (routerlogin.net admin password)

While changing your Netgear router password in above steps, you must enable password reset/recovery option. This helps you in case you somehow forget it or misplace it if written somewhere. Enabling the password recovery as an option on your Netgear router, you will be able to reset your routerlogin.net admin password as explained here:

Reset forgotten NETGEAR Router admin Password
  • Open a default Web Browser on your computer to use the Internet for netgear router login.
  • Key in Netger router login local web address routerlogin.net in the address bar box.
  • You can use Netgear router login IP 192.168.1.1 or http://192.168.1.1 in address bar instead of routerlogin.net.
  • Press Enter or Search to begin Netgear router login for your Netear wireless router settings configuration.
  • The Netgear router login page appears with login username and login password fields.
  • As you forgot your Netgear router login password, click on the Cancel tab.
  • If you had earlier enabled password recovery in above guide, you will be able to recover your admin password.
  • Enter the serial number of the Netgear wireless router model as on back of the router.
  • Answer the security questions in the next screen for confirmation that you had setup initially during enabling password recovery feature.
  • Continue ahead to reset the password of your Netgear wireless router login.
  • When asked create a new password and then re-enter it for confirmation.
  • Set new security questions if you see the screen for future.
  • Select Next to compete and save the settings.

The Netgear router login password or routerlogin.net admin password router will now be recovered and set for Netgear router login. In case you had not previously enabled the password recovery feature in above guide, you will not be able to recover your lost password. In this case, you will have to perform factory reset on your can Netgear router as this will reset the routerlogin.net admin password to the default setting “password”.

Netgear router reset

For any kind of login or settings access issue with your Netgear wireless router such as forgotten settings of your Wi-Fi Network or forgotten the login password, resetting a router is of great help. Performing a factory reset on your Netgear router resets all of your personalized login password settings to the default.  You can then login NEtgear ruter using the default Netgear router login password.

To perform a factory reset on your Netgear wireless Router:-

  • Check your NETGEAR wireless Router is powered on and working stably.
  • Locate a tiny size button on the back of your Netgear router model which says Restore Factory Settings/ Reset.
  • Using something sharp, press and hold that button to reset router for about 10 seconds.
  • Release the button once you see the light stop flashing.
  • Your Netgear router will restart after rebooting with all the settings set back to the default.

Use the default username as “admin” and the default password as “password” for Netgear router login after Netgear router reset to reach the home page.

Netgear router wifi password

The wifi password is the default wifi password of your NETGEAR Wi-Fi Network used to connect to the wireless network. It is found displayed under your Router. As the mentioned netgear router wifi password is easy to be guessed, it makes your Netgear router wireless network insecure. It can allow unauthorized users to connect to your netgear wireless network quite easily. Therefore, it is always better to change your Netgear Wi-Fi Network settings – SSID and the password as detailed below:

 

Secure Your Netgear Wireless Network by changing the wireless network password

To change the Netgear Wireless Network Password:-

  • Open a default Web Browser on your computer to use the Internet for netgear router login.
  • Key in Netger router login local web address routerlogin.net in the address bar box.
  • You can use Netgear router login IP 192.168.1.1 or http://192.168.1.1 in address bar instead of routerlogin.net.
  • Press Enter or Search to begin Netgear router login for your Netear wireless router settings configuration.
  • The Netgear router login page appears with login username and login password fields.
  • Enter the default Netgear login username “admin” and the default Netgear router login password “password” in respective boxes.
  • The Basic home page of Netgear will show on screen.
  • Access the Wireless section.
  • The wireless settings page of your Netgear wireless router will display.
  • Type in strong password to create new in the Password (Network Key) field.
  • Do not forget to Apply the changes.

You now have secure Netgear route wireless network password to connect the selected devices to your wifi network using new password. Once you have made changes to your password, All the connected devices to your Netgear router’s wifi network will get disconnected from the Wi-Fi. You must reconnect them using the new wireless network password/key to connect to Netgear router’s wifi network.

Secure Your Netgear Wireless Network by changing the wireless network name/SSID

To change the name of your NETGEAR WiFi network (SSID):-

  • Open a default Web Browser on your computer to use the Internet for netgear router login.
  • Key in Netger router login local web address routerlogin.net in the address bar box.
  • You can use Netgear router login IP 192.168.1.1 or http://192.168.1.1 in address bar instead of routerlogin.net.
  • Press Enter or Search to begin Netgear router login for your Netear wireless router settings configuration.
  • The Netgear router login page appears with login username and login password fields.
  • Enter the default Netgear login username “admin” and the default Netgear router login password “password” in respective boxes.
  • The Basic home page of Netgear will show on screen.
  • Access the Wireless section.
  • The wireless settings page of your Netgear wireless router will display.
  • Create a new wireless network name in the SSID field.
  • Click Apply the save the changes.

Your devices connected to netgear router’s network may get disconnected aftr changing the wireless network name or SSID. Search for available wifi networks and re-connect to the new Wi-Fi Network name/SSID.

Secure Netgear wireless Network

It is important to have secured router functioning to prevent any data to get lost. Similar to securing your wireless network settings, you must also provide other security accesses to your network. To create secured netgear router network, several types of wireless security encryption levels are available such as WEP, WPA-2, etc. You must set a supported encryption level of your choice on your Netgear router’s Wireless Network and secure it. To secure your Netgear Wireless Network using WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) encryption:-

You must have a computer that is connected to the NETGEAR router during Netgear router setup. The connection must be using an Ethernet Cable which is strongly fixed.

  • Open a default Web Browser on your computer to use the Internet for netgear router login.
  • Key in Netger router login local web address routerlogin.net in the address bar box.
  • You can use Netgear router login IP 192.168.1.1 or http://192.168.1.1 in address bar instead of routerlogin.net.
  • Press Enter or Search to begin Netgear router login for your Netear wireless router settings configuration.
  • The Netgear router login page appears with login username and login password fields.
  • Enter the default Netgear login username “admin” and the default Netgear router login password “password” in respective boxes.

 

  • The Basic home page of Netgear will show on screen.
  • Select the Wireless Settings and visit Security Options below it.
  • On the page, select WPA-PSK as given option to enable security encryption.
  • You will also have to enter the password in the Passphrase field to security encryption network
  • Save the changes.

The selected wireless encryption will secure your Netgear wireless router.

Netgear router setup – via netgear genie login

The Netgear genie desktop or mobile app allows you t easily setup and install your new Netgear router using netgear genie dashboard. The netgear genie dashboard can be easily accessed through Netgear genie login using routerlogin.net as web address.

 

Setup Netgear router
  • Place your Netgear router at desired location or plugged into a wall outlet.
  • Attach the Ethernet cable to modem in use and your Netgear router at it yellow colored internet port.
  • Also, attach an Ethernet cable to computer and the Netgear wireless router at either ends at the LAN ports.
  • Open a default Web Browser on your computer to use the Internet for netgear router login.
  • Key in Netger router login local web address www.routerlogin.net in the address bar box.
  • The Netgear genie smart setup wizard will show up.
  • The netgear genie automatically allows setup through onscreen steps.